STRONGER PERFORMANCE SAVES YOU TIME

Marangoni indsutrial tyres are the only choice for those who want maximum performance and minimum wear. Those who work hard know how crucial time is. Continuous and extended use with no downtime for maintenance is a critical time saver. This indisputable advantage combined with high quality compounds and raw materials that extend the tyre’s lifespan allows us to achieve another key result: a reduction in costs. The wide range of Marangoni indsutrial tyres products is able to meet any and all requirements in terms of reliability, performance and safety. Guaranteed return for a long-term investment.

A SINGLE RESPONSE TO ALL YOUR NEEDS: PERFORMANCE

  • ACHIEVE HIGH STANDARDS OF QUALITYAND RELIABILITY

    The management of the entire production process makes MARANGONI INDUSTRIAL TYRES one of the few companies able to choose compounds, technologies, machinery and moulds, while at the same time implementing unparalleled know-how. This results in highly proven and cutting edge products that always offer the performance you need.

  • CUT OPERATING COSTS

    Reducing rolling resistance means reducing heat and thus energy consumption. The benefits are a greater yield per battery charge for electric forklifts and fewer refuelling stops for those based on internal combustion engines.

  • CHOOSE THE BEST PRODUCT

    Many of the leading manufacturers of
    forklifts and industrial vehicles have
    chosen MARANGONI INDUSTRIAL TYRES as their original equipment supplier and have cooperated with the Research and Development Centre to develop their products according to different needs: efficiency, safety, and comfort. Users can benefit from the wide range of products offered by MARANGONI INDUSTRIAL TYRES, a leading specialist in the sector globally.

  • IMPROVE EFFICIENCY

    Constant performance levels, limited
    wear, plus comfort, stability and excellent loading capacity guarantee higher efficiency even for heavy duty forklifts.

  • REDUCE YOUR COMPANY’S FOOTPRINT

    By ensuring industrial tyres a longer
    lifespan and decreasing the energy
    consumption of vehicles, which in turn reduces polluting emissions and thus the overall ecological impact is significantly reduced.

1 5

STRENGTH SPECIALIST

The quality of the compounds used is essential in the solid industrial tyre sector.

  • TREAD COMPOUND | LIFESPAN

    Resistant to wear and tear, guarantees excellent grip on wet or slippery surfaces (e.g. oil stains).

  • CUSHION COMPOUND | COMFORT

    Central Compound, lowers operating temperature and ensures low rolling resistance.

  • BASE 2 | SAVING

    Extremely hard material that reduces deformation and supports the load while preserving bead stiffness and preventing the tyre from coming off the rim.

  • BASE 1 | STABILITY

    Ensures the tyre remains attached to the rim over time: the metal rings inside the tyre adhere perfectly to the metal. Perfect coupling to the rim: easy to fit and remove

1 4

SURFACE

RECOMMENDED USE

SPECIAL-S

This version was designed and developed especially for loaders and produced in the 20 and 24 inch sizes. It is constructed using compounds which are particularly resistant to tearing. The tyre stands out for its resistance to wear and tear, jolts, cuts and abrasions, as well as for its high rigidity that provides stability to the vehicle and, therefore, to the load. Used for vehicles which carry loads, usually in environments with extreme conditions, such as scrap yards and dumps.

HIGH CAPACITY-HL

This is a tyre designed with a highly rigid structure in comparison to standard tyres. It is constructed with extremely hard compounds that are able to maintain all the other physical and mechanical characteristics to excellent levels. The distinguishing feature of Super-elastic and Cushion tyres is their ability to sustain high loads with minimal deformation. It is widely used in situations where it is of paramount importance to maintain the stability of the vehicle and, therefore, of the load. It is also utilised in other specific cases. Contact a MARANGONI INDUSTRIAL TYRES technician for advice before choosing this version.

ANTISTATIC-AS

This tyre was designed to release the static electricity accumulated by the vehicle onto the ground. It is constructed with special additives which perform this action while maintaining all the other physical and mechanical characteristics to excellent levels. It is typically used in paint and solvent factories, in gas tank deposits, in environments with easily flammable fine dust particles or in environments where the accumulation of static electricity can cause explosions. In all of these cases, the use of this tyre increases safety levels. The AS Super-elastic and Cushion tyres are in compliance with the ISO/DIS 2883 standards. A certificate of conformity shall be provided upon customers’ request.

NON MARKING-NM

This is a yellow coloured tyre, designed not to leave dark marks on the ground surface. It is constructed with a yellow mixture, containing no dark substances. It’s use is recommended in environments where cleanliness is of great importance, for example in the pharmaceutical, food and beverage, and electronic industries, or anywhere light coloured floors must stay clean.

INNOVATIVE SOLUTIONS

SUPER-ELASTIC ELTOR® E3 INTEGRATED LOADER SYSTEM

The MARANGONI INDUSTRIAL TYRES integrated loader system is ideal for all stressful situations in which the machines have to work in a stationary position, travelling just short distances and carrying particularly heavy loads (scrap yards, landfills, timber yards, etc.).

  • SUPER-ELASTIC ELTOR® E3

    High stability tyre designed to withstand very high loads. The reinforced sidewall limits vertical deformation and protects against accidental impact. The compounds used guarantee maximum resistance to cuts and tears and consequently longer life. The tread is designed to improve traction in all working conditions.

  • RING PROTECTOR

    The spacer perfectly traces the profile of the MARANGONI INDUSTRIAL TYRES Eltor® E3 tyre sidewall, thus preventing infiltration of debris and the like

  • RIM

    The reinforced rim with flat bottom channel, designed especially to mount MARANGONI INDUSTRIAL TYRES ONYX solid tyres, solves all skidding problems. Especially robust due to increased thickness and elimination of the aeration holes and the hole for the inflation valve.

1 3

SUPER-ELASTIC ELTOR FIX®

FIX – Bead structure consist of a special border made of highly resistant rubber; guarantees a perfect fit on the rim with no need for fastening rings.

ELTOR FIX®

Quick and easy installation for bead FIX version.

ELTOR ® STANDARD (NON FIX)

Fits on industrial multipiece rims for bead non-FIX version. Movable rimparts 1, 2 and 3.

  • RIMS FOR FIX SOLID TYRES

    • Fit all sizes of FIX Solid Tyres from 8” to 20”.
    • Available for all standard applications.
    • Adaptable to most custom applications.

  • SPLIT RIMS (DIVIDED TYPE)

    • Designed for easy tyre installation and precise fitment without press.

  • INDUSTRIAL MULTIPIECE RIMS

    • Fit all sizes of Industrial Tyres from 8” to 24”.
    • Available for all standard and heavy duty (20 and 24”) applications.
    • Multipiece design includes 2 or 3 piece components or base wheel for the FIX type applications.
    • Fit tube type tyres as well as NON FIX solid tyres.
    • Designed for easy tyre installation and precise fitment.

  • WHEELS FOR POB CUSHION TYRES

    • Fit all sizes of press on band cushion from 6,5” to 22”.
    • Available for all standard applications.
    • Adaptable to most custom applications.
1 4